Program Bantu RCstructureMDL berbasis GNU Octave untuk Permodelan Otomatis Struktur Beton Bertulang pada OpenSees
Keywords:
Automatic modeling, Octave, OpenSees, Structural responseAbstract
Structural analysis requires modeling using computer programs, one of which is OpenSees which uses TCL the one-line commands for modeling, analysis, material properties and other aspects. The lack of a GUI that makes users friendly in OpenSees can cause modeling errors. In this research, the Octave-based RCstructureMDL program was developed for automatic modeling of reinforced concrete structures on OpenSees. Three models with variations in the number of floors and frames in the X and Y directions are used to test the flexibility and the correctness of the model. Flexibility can be seen from the ease of creating modeling commands from three models by changing the variables nX, nY, nf, span_X, span_Y, and storey_Z. Support reaction value shows the same value as the vertical and horizontal load entered at all top floor points, so the model generated automatically using this program can be used for analysis.
References
Aghagholizadeh, Mehrdad. 2020. “A Finite Element Model for Seismic Response Analysis of Vertically-Damped Rocking-Columns.” Engineering Structures 219 (September):110894. https://doi.org/10.1016/j.engstruct.2020.110894.
Arfiadi, Yoyong. 2019. “Pengaruh Deformasi Geser Pada Program Bantu Analisis Struktur REALIN2D Untuk Portal 2 Dimensi.” In Konferensi Nasional Teknik Sipil (KoNTekS). https://repository.uajy.ac.id/id/eprint/21897/.
Eaton, John W. 2012. “GNU Octave and Reproducible Research.” Journal of Process Control 22 (8): 1433–38. https://doi.org/10.1016/j.jprocont.2012.04.006.
Gutiérrez-Urzúa, Fernando. 2021. OpenSees - Reinforced Concrete 3D Model - 1 Model Definition. https://www.youtube.com/watch?v=2-R91GclKzs.
Mashayekhi, Mohammadreza, Alireza Shirpour, and Reza Sadeghi. 2023. “Finding Optimum Parameters of Passive Tuned Mass Damper by PSO, WOA, and Hybrid PSO-WOA (HPW) Algorithms.” Journal of Soft Computing in Civil Engineering 7 (4): 72–92.
Mazzoni, Silvia, Frank McKenna, Michael H. Scott, and Gregory L. Fenves. 2006. OpenSees Command Language Manual. California: Pacific earthquake engineering research center.
Minafò, Giovanni, and Gaetano Camarda. 2023. “Development of a Software Package with GUI for the Evaluation of Monolithicity Factors of RC Jacketed Columns.” Structures 48 (February):1939–48. https://doi.org/10.1016/j.istruc.2023.01.061.
OpenSees . 2022. "OpenSees Examples" https://opensees.berkeley.edu/wiki/index.php/Examples
Shabani, Amirhosein, and Mahdi Kioumarsi. 2022. “Hyperomet: An OpenSees Interface for Nonlinear Analysis of Unreinforced Masonry Buildings.” SoftwareX 20 (December):101230. https://doi.org/10.1016/j.softx.2022.101230.
Velasco, Luis, Antonio Hospitaler, and Hector Guerrero. 2022. “Optimal Design of the Seismic Retrofitting of Reinforced Concrete Framed Structures Using BRBs.” Bulletin of Earthquake Engineering 20 (10): 5135–60. https://doi.org/10.1007/s10518-022-01394-z.
Yu, Jinguang, Chu Zhao, Weihui Zhong, and Xu Zhao. 2023. “Genetic Algorithm Model of PEC Column-Steel Plate Shear Wall with Flush End-Plate Joints Based on Component Method.” Soil Dynamics and Earthquake Engineering 170 (July):107910. https://doi.org/10.1016/j.soildyn.2023.107910.
Zhu, Hanbo, Jinsheng Cheng, Mei-Ling Zhuang, Chuanzhi Sun, Li Gao, Youzhi Wang, Junxiang Shao, Lu Han, Haibo Fang, and Lin Zhao. 2023. “Numerical Simulation Methods for Reinforced Concrete Columns Considering Parameter Stochasticity.” Structures 57 (November):105325. https://doi.org/10.1016/j.istruc.2023.105325.
Published
How to Cite
Issue
Section
Copyright (c) 2026 Hendry David Zacharias
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms: (1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal; (2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal; (3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
LOCAL ENGINEERINR Journal of Architecture and Civil Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
