Perbandingan Tulangan Kolom dan Deformasi Struktur Gedung
Keywords:
Analysis, Frame, Reinforcement, Shear wallsAbstract
The Moment-Resisting Frame System (MRFS) equipped with shear walls shows a significant increase in structural stiffness compared to systems without shear walls. The results of the inter-storey drift analysis confirm that the presence of shear walls reduces the horizontal deformation of the building, thereby increasing lateral stability. In addition, the use of shear walls contributes to the efficiency of reinforcement requirements, as seen in the column reinforcement ratio of 3%, which is lower than that of structures without shear walls, which reaches 5%. Although the mass of the structure with shear walls is greater, namely 4747.96 kN compared to 3853.08 kN in structures without shear walls, this system still offers advantages in terms of more efficient use of main reinforcement. Overall, the integration of shear walls in the frame system provides better structural performance through increased stiffness, reduced deflection, and optimised reinforcement requirements.
References
Aluminium, A. 2020. 7, 18. History of Aluminium. Retrieved from The Aluminium Association: https://www.aluminum.org/aluminum-advantage/history-aluminum
Badan Standarisasi Nasional. 2019. Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Gedung dan non-Gedung SNI 1726:2019, Standar Nasional Indonesia, Jakarta
Badan Standarisasi Nasional. 2020. Beban Minimum Untuk Perancangan Bangunan Gedung dan Struktur Lain SNI 1727:2020, Standar Nasional Indonesia, Jakarta
Badan Standarisasi Nasional. 2019. Beton Struktural Untuk Bangunan Gedung SNI 2847:2019, Standar Nasional Indonesia, Jakarta
Charles G. Salmon, J. E. 1997. Steel Structures: Design and Behavior. USA: Prentice Hall.
Damar Budi Laksono, H. Y. 2012. Studi Kekuatan Kolom Profil C Dengan Cor Beton Pengisi Dan Perkuatan Transversal. Jurnal Teknik Sipil, 95.
David, William, and FX Supartono. 2023. “ANALISIS PENGARUH CONSTRUCTION STAGE TERHADAP DEFORMASI DAN GAYA DALAM STRUKTUR GEDUNG BERTINGKAT DENGAN DINDING GESER.” JMTS: Jurnal Mitra Teknik Sipil, February, 109–22. https://doi.org/10.24912/jmts.v6i1.17043.
Departemen Pekerjaan Umum. 1987. Pedoman Perencanaan Pembebanan Untuk Rumah dan Gedung, Kementerian Pekerja Umum, Jakarta
Dumanauw, J. 1990. Mengenal Kayu. Yogyakarta: Kanisius.
Ghazijahani, T. G. 2020. 7, 14. Composite Timber Beams Strengthened by Steel and Composites. Retrieved from ascelibrary.org: https://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29CC.1943-5614.0000714
Hartini, D. 2016. Analisis Elemen Hingga Untuk Faktor Konsentrasi Tegangan Pada Pelat Isotropik Berlubang Dengan Pin-Loaded. Jurnal Angkasa, 69-78.
Shih, R. H. 2010. AutoCAD 2008 Tutorial First Level: 2D Fundamentals . Indianapolis : Schroff Development Corporation Publisher.
Published
How to Cite
Issue
Section
Copyright (c) 2026 Syahrul Alamsyah, Wira Setiawan, Muh Apriansyah, M. Deta Zulfikar, Sulis Syaputri, M. Ziaul Fikar
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms: (1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal; (2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal; (3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
LOCAL ENGINEERINR Journal of Architecture and Civil Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
